Sainlogic FT0360 - User Manual

FT0360 Professional WiFi Weather Station
User Manual
1. Introduction..........................................................................1
2. Warnings and Cautions........................................................1
3. Getting Started.....................................................................1
3.1 Parts List.........................................................................1
3.2 Recommend Tools.........................................................5
3.3 Sensor Assembly Set Up................................................5
3.3.1 Wind Vane Installation..............................................6
3.3.2 Wind Cup Installation... ............................................8
3.3.3 Rain Gauge Installation............................................9
3.3.4 Battery Installation..................................................10
3.3.5 Reset Integrated Outdoor Sensor...........................11
3.4 Display Console............................................................11
3.4.1 Layout of Display Console.....................................11
3.4.2 Setup the Display Console ....................................12
3.4.3 Connect Sensors with Display Console.................13
3.5 Sensor Operation Verification.......................................14
3.6 WiFi Setup Guide.........................................................15
4. Sensors Pre-Installation.....................................................15
4.1 Test the Sensors Before Installation.............................15
4.2 Site Survey Before Installation......................................15
4.3 Best Practices for Wireless Communication.................16
5. Final Installation of Sensors...............................................18
5.1 Integrated outdoor Sensor Installation..........................18

Summary

Introduction to FT0360 Weather Station

Safety Warnings and Cautions

Getting Started with Your Weather Station

Weather Station Parts List

Lists all components included with the FT0360 weather station for setup and operation.

Recommended Tools for Installation

Lists essential tools required for the proper installation and setup of the weather station.

Outdoor Sensor Assembly and Setup

Provides step-by-step instructions for assembling and setting up the integrated outdoor sensor array.

Display Console Setup and Operation

Guides on setting up and connecting the display console, including battery installation and console layout.

Verifying Sensor Operation

Steps to confirm that all sensors are functioning correctly before final installation.

WiFi Connectivity Setup

Instructions for connecting the weather station to a WiFi network for data uploading.

Sensors Pre-Installation Procedures

Testing Sensors Before Final Installation

Recommends operating and testing the weather station for one week before permanent installation.

Site Survey for Optimal Installation

Guidelines for conducting a site survey considering factors like obstructions and wireless range.

Best Practices for Wireless Communication

Provides recommendations for trouble-free wireless communication, addressing interference and barriers.

Final Installation of Weather Station Sensors

Integrated Outdoor Sensor Installation Guide

Detailed steps for installing the integrated outdoor sensor, including hemisphere references and mounting.

Low Battery Indicator on Display

Display Console Operation and Features

Quick Display Mode Navigation

Explains how to use the Quick Display Mode to view different weather parameters and data.

Set (Program) Mode Configuration

Details how to enter and configure settings using the Set (Program) Mode for various parameters.

Sensor Search Mode Functionality

Describes how to initiate and manage the sensor search mode to reacquire lost transmission data.

Max;Min Value Viewing and Reset

Instructions for viewing and resetting maximum and minimum recorded weather data values.

Snooze Mode for Alarms

Explains how to use the Snooze mode to silence alarms temporarily and manage backlight.

Backlight Brightness Adjustment

Details on adjusting the display backlight brightness and its behavior on battery or adapter power.

Weather Station Alarm Modes

Alarm Triggering and Silencing

Describes what happens when an alarm condition is met and how to silence the audible alert.

Viewing High and Low Alarm Values

Instructions on how to access and view the current high and low alarm settings and values.

Setting Custom Alarms

Step-by-step guide for setting specific alarm parameters like hour, minute, and thresholds.

Alarm and Key Beeper Control

How to turn the audible alarm beeper (BZ) on or off for the console.

Optional Calibration Procedures

Temperature Sensor Calibration

Guide for calibrating the indoor and outdoor temperature readings to a known source.

Humidity Sensor Calibration

Instructions on calibrating humidity readings to correct for drift and improve accuracy.

Pressure, Wind, and Rain Calibration

Procedures for calibrating pressure, wind speed, and rainfall measurements.

Additional Display Console Features

Understanding Weather Forecasting

Explanation of how the weather forecast is generated based on barometric pressure changes.

Weather Condition Icons Explained

Description and meaning of the various weather icons displayed on the console.

Moon Phase Display Information

Information regarding the display of moon phases based on the calendar date.

Feels Like and Apparent Temperature

Details on how 'Feels Like' temperature (Heat Index/Wind Chill) and Apparent Temperature are calculated.

Pressure Threshold Setting for Forecasting

How to adjust the pressure threshold to fine-tune weather forecast sensitivity.

Restoring Factory Default Settings

Procedure to reset the display console to its original factory default configuration.

Troubleshooting Common Issues

Technical Specifications and Details

Measurement Parameter Specifications

Provides detailed specifications for all measured parameters including range, accuracy, and resolution.

Wireless Communication Specifications

Details on wireless transmit range, frequency, and sensor data update period.

Power Consumption and Battery Life

Information on power requirements for the display console and sensors, and expected battery life.

Sainlogic FT0360 Specifications

General

Brand	Sainlogic
Model	FT0360
Type	Wireless Weather Station
Temperature Range (Indoor)	0°C to 50°C (32°F to 122°F)
Rainfall Measurement	0 to 9999 mm
Rainfall Display	Daily, weekly, monthly, yearly
Power (Outdoor Sensor)	2 x AA batteries
Display	LCD
Wireless Range	100 meters
Temperature Range (Outdoor)	-40°C to 60°C
Humidity Range	10% to 99%
Wind Speed Measurement Range	0 to 50 m/s
Power (Main Unit)	5V DC adapter
PC Connection	Not supported