stabilize due to signal filtering. The
indoor and outdoor temperature
sensors should agree within 2°C/4°F)
(the sensor accuracy is ± 1°C/2°F)).
Use the calibration feature to match
the indoor and outdoor temperature to
a known source.
Indoor and Outdoor
Humidity do not
agree
Allow up to one hour for the sensors to
stabilize due to signal filtering. The
indoor and outdoor humidity sensors
should agree within 10 % (the sensor
accuracy is ± 5 %).
Use the calibration feature to match
the indoor and outdoor humidity to a
known source.
Display console
contrast is weak
Replace console batteries with a fresh
set of batteries.
12. Specification
12.1 Measurement Specifications
The following table provides specifications for the measured
parameters.
To Next Page
Loading...
