Sainlogic WS0835 - User Manual

Questions and Answers

A
Alexis CollinsAug 6, 2025
What to do if the Sainlogic Weather Station wireless remote is not reporting to the console?
- C
  crystaljohnsonAug 7, 2025
  If you see dashes (--.-) on your Sainlogic Weather Station display console, it indicates a loss of sensor communication. To fix this, try the following: * Press and hold the CHANNEL/+ button for 3 seconds until the remote search icon appears. * Ensure the sensor is within the communication range (100m/330ft in ideal conditions, 30m/100ft in most conditions). * Adjust the distance between the sensor and console, ensuring it's not too close (less than 1.5m/5ft). * Replace the batteries in the remote sensor, using lithium batteries for cold environments. * Confirm the sensor isn't transmitting through metal or earth barriers.
T
Terri SaundersAug 14, 2025
Why indoor and outdoor temperature of Sainlogic Weather Station do not agree?
- N
  ndavisAug 14, 2025
  If the indoor and outdoor temperatures on your Sainlogic Weather Station don't match, allow about an hour for the sensors to stabilize due to signal filtering. Keep in mind that the sensors should agree within 2°C/4°F, as the sensor accuracy is ± 1°C/2°F. If the discrepancy persists, you can use the calibration feature to align the indoor and outdoor temperatures to a known, reliable source.
D
Daisy BrownAug 21, 2025
Why indoor and outdoor humidity of Sainlogic WS0835 Weather Station do not agree?
- J
  James UnderwoodAug 21, 2025
  If the indoor and outdoor humidity readings on your Sainlogic Weather Station are inconsistent, give the sensors about an hour to stabilize because of signal filtering. The humidity sensors should agree within 10%, considering the sensor accuracy is ±5%. If the issue continues, calibrate the indoor and outdoor humidity readings using a trusted source for comparison.
H
hwilliamsAug 28, 2025
How to fix weak display console contrast on Sainlogic Weather Station?
- M
  melody80Aug 28, 2025
  If the display console contrast on your Sainlogic Weather Station appears weak, try replacing the console batteries with a fresh set.

Summary

Warnings and Cautions

Getting Started

Parts List

Lists all components included with the weather station for initial setup.

Sensor Assembly Set Up

Install Integrated Outdoor Sensor Battery

Details how to insert batteries into the outdoor sensor unit for power.

Display Console

Layout of Display Console

Explains the different sections and indicators on the main display console screen.

Setup the Display Console

Connect Sensors with Display Console

Sensor Operation Verification

Sensors Pre-Installation

Test the Sensors Before Installation

Recommends testing all sensors for a week before final installation for proper function.

Site Survey Before Installation

Provides guidance on choosing an optimal location for the sensor array, considering obstructions and access.

Best Practices for Wireless Communication

Final Installation of Sensor

Integrated Outdoor Sensor Installation

Guides on installing the outdoor sensor, including wind direction calibration for hemispheres.

Low Battery Icon

Display Console Operation

Quick Display Mode

Describes how to cycle through different data views on the display console using the SET key.

Set (Program) Mode

Max;Min Viewing and Reset Mode

Max Record Viewing and Reset

Explains how to view and clear maximum recorded values for various weather parameters.

Min Record Viewing and Reset

Snooze Mode

Backlight Mode

Adjustable Brightness of Backlight

Details how to adjust the display's backlight brightness and turn it on/off.

Alarm Mode

Alarm Triggered

Describes what happens when an alarm condition is met and how to silence audible alarms.

View High;Low Alarms Value

Explains how to access and view the high and low alarm settings for different weather parameters.

Setting the Alarms

Optional Calibration Mode

Calibration of Temperature Mode

Calibration of Humidity Mode

Calibration of Sensors Mode

Other Features of Display Console

Weather Forecasting

Explains that weather forecasts are based on barometric pressure changes and are estimations.

Weather Icons

Details the meaning of different weather icons displayed on the console based on pressure trends.

Feels Like Temperature

Explains 'Feels Like' temperature as a combination of Heat Index and Wind Chill, providing a chart.

Restore Factory Default

Maintenance

Trouble Shooting Guide

Specifications

Measurement Specifications

Provides detailed specifications for temperature, humidity, and rain measurements, including range and accuracy.

Wireless Specifications

Sainlogic WS0835 Specifications

General

Type	Wireless Weather Station
Display	LCD
Temperature Range (Indoor)	0°C to 50°C (32°F to 122°F)
Temperature Range (Outdoor)	-40°C to 60°C (-40°F to 140°F)
Wind Speed Range	0 to 50 m/s (0 to 112 mph)
Rainfall Range	0 to 9999 mm
Update Rate	Every 16 seconds
Transmission Frequency	433 MHz
Connectivity	Wireless
Wireless Range	100 meters
Power (Base Station)	3 x AA batteries
Power (Outdoor Sensor)	2 x AA batteries
Memory	No
Humidity Range	10% to 99% RH