EasyManua.ls Logo

Sainlogic WS0835 - Setting the Alarms

Sainlogic WS0835
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 31 -
Press ALARM key again to view the LOW alarms along with
the alarm clock time in the same way as HI alarms.
Press ALARM key again to return to normal mode.
Note: Press the SNOOZE key at any time to return to the
normal mode in HI/Low alarm mode.
8.3 Setting the Alarms
Press ALARM key to enter the alarm mode.
Press and hold the SET key for three seconds. The first alarm
parameter will begin flashing (alarm hour).
To save the alarm setting and proceed to the next alarm
parameter, Press (do not hold) the SET key.
To adjust the alarm parameter, press the CHANNEL/+ key or
MIN/MAX- key to increase or decrease the alarm settings, or
press and hold the CHANNEL/+ key or MIN/MAX- key for
three seconds to increase or decrease the alarm settings
rapidly.
Press the ALARM key to turn on (the alarm icon will appear )
and off the alarm.
Press the SNOOZE key twice at any time to return to the
normal mode. After 30 seconds of inactivity, the alarm mode
will time out and return to normal mode.

Related product manuals