Sainlogic WS0835 - Trouble Shooting Guide

- 46 -
12. Trouble Shooting Guide
Problem
Solution
Wireless remote
not reporting in to
console.
There are dashes
(--.-) on the display
console.
If any of the sensor communication is
lost, dashes (--.-) will be displayed on
the screen. To reacquire the signal,
press and hold the CHANNEL/+ button
for 3 seconds, the remote search
icon will be constantly displayed.
Once the signal is reacquired, the
remote search icon will turn off, and
the current values will be displayed.
The maximum line of sight
communication range is 100m(330ft)
and 30m(100ft) under most conditions.
Move the sensor assembly closer to
the display console.
If the sensor assembly is too close
(less than 1.5m/5ft), move the sensor
assembly away from the display
console.
Install a fresh set of batteries in the
remote sensor. For cold weather
environments, install lithium batteries.
Make sure the remote sensors are not
transmitting through solid metal (acts
as an RF shield), or earth barrier