EasyManua.ls Logo

Sainlogic WS-0835 - 12. Troubleshooting Guide

Sainlogic WS-0835
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
30
B: Install the collector funnel.
Figure 22
2. Replace the wind, rain and thermo-hygrometer transmitter batteries
once every 1-2 years
12. Troubleshooting Guide.
Problem
Solution
Wireless remote
not reporting in to
console.
There are dashes
(--.-) on the
display console.
If any of the sensor communication is lost,
dashes (--.-) will be displayed on the screen. To
reacquire the signal, press and hold the
CHANNEL/+ button for 3 seconds, and the
remote search icon will be constantly
displayed. Once the signal is reacquired, the
remote search icon will turn off, and the
current values will be displayed.
The maximum line of sight communication range
is 300 ft and 100 ft under most conditions. Move
the sensor assembly closer to the display
console.
If the sensor assembly is too close (less than
1.5m), move the sensor assembly away from the
display console.

Related product manuals