1. If a specific channel is lost, press the CHANNEL/+ button until
the channel indication arrow is pointing at the appropriate
channel.
Press and hold the CHANNEL/+ button for 3 seconds, and the
remote search icon will be constantly displayed for up to 10
minutes.Once the signal is reacquired, the remote search icon
will turn off, and the current value will be displayed.
2. If new sensors are added, subtracted, or multiple sensor
channels are lost, press the CHANNEL/+ button until the
channel indication arrow is pointing at the indoor temperature
and humidity . Press and hold the CHANNEL/+ button for 3
seconds, and the remote search icon will be constantly
displayed for up to 10 minutes. Once the signal is reacquired,
the remote search icon will turn off, and the current value will
be displayed.
5.6 Best Practices for Wireless Communication
Wireless communication is susceptible to interference, distance, walls
and metal barriers. We recommend the following best practices for
trouble free wireless communication.
1. Electro-Magnetic Interference (EMI). Keep the console
several feet away from computer monitors and TVs.
2. Radio Frequency Interference (RFI). If you have other 433
MHz devices and communication is intermittent, try turning off
these other devices for troubleshooting purposes. You may
need to relocate the transmitters or receivers to avoid
intermittent communication.
3. Line of Sight Rating. This device is rated at 100m line of sight
(no interference, barriers or walls) but typically you will get 30 m
maximum under most real-world installations, which include
passing through barriers or walls.
4. Metal Barriers. Radio frequency will not pass through metal
barriers such as aluminum siding. If you have metal siding,
-27-
To Next Page
Loading...
