If any of the sensor communication is
lost, dashes (--.-) will be displayed on
the screen. To reacquire the signal,
press and hold the CHANNEL/+ button
for 3 seconds, choose the lost sensor
and the remote search icon will be
constantly displayed. Once the signal
is reacquired, the remote search
icon will turn off, and the current
values will be displayed.
The maximum line of sight
communication range is 100m(330ft)
and 30m(100ft) under most conditions.
Move the sensor assembly closer to
the display console.
If the sensor assembly is too close
(less than 1.5m/5ft), move the sensor
assembly away from the display
console.
Install a fresh set of batteries in the
remote sensor. For cold weather
environments, install lithium batteries.
Make sure the remote sensors are not
transmitting through solid metal (acts
as an RF shield), or earth barrier
(down a hill).
To Next Page
Loading...
