34
2.1.4 Restore Failsafe
Restore factory setting.
3. No card/print from SD
When there is no inserted SD card, it will display No Card.
When your card is inserted, choose the file that you need to print from your SD card.
4. Init.SD-Card/Change SD-Card
Please initialize you SD card every time you insert one.
5. Tune
Notice: This option is only accessible for manual parameters adjustment during printing process.
Speed Adjust the printing speed
Nozzle Adjust the nozzle temperature
Bed Adjust the heated bed temperature
Fan Speed Adjust the fan temperature
Flow Adjust the filament flow
To Next Page
Loading...
