Do keep your hair, clothing and gloves away from moving parts.
Do not touch the nozzle and build plate during printing.
Do not touch the nozzle after finishing printing.
Do not operate the device while you are tired or under the influence of drugs, alcohol or medication.
4. Cautions
Do not leave the device unattended for long.
Do not make any modifications to the device.
Do not remove the models with force.
Do operate the device in a well-ventilated environment.
To lower the build plate before loading/unloading filament. The distance between the nozzle and build plate should be
kept for at least 50mm.
Never use the device for illegal activities.
Never use the device to make any food storage vessels.
Never use the device to make any electrical appliance. Never put the model into your mouth.
Notice: Environment Requirements Temperature: RT 15-30 C
Moisture: 20%-70%
5. Filament
Do not abuse the filament.
Do not unpack until filament is needed.
Storage all polymers degrade with time.
Filament should be stored in clean and dry conditions.
4
To Next Page
Loading...
