36
Part 3: Control Card Introduction
b. 3018 MX3 control card features
1. Applicable to mach3mill CNC software, support Windows XP, Windows 7 32 / 64bit, Windows8,
Windows10 operating system;
2. USB interface communication, support 3-axis engraving, support laser cutting;
3. Support automatic tool setting function;
4. External emergency stop switch, limit switch (home switch);
5. Onboard motor driver, maximum 32 micro steps, the motor runs smoothly;
6. The maximum output pulse frequency is 100KHz;
7. All control signals are isolated by optocoupler and have strong anti-interference ability;
8. Support external MPG for manual control.
To Next Page
Loading...
