Need help?Do you have a question about the SainSmart Genmitsu and is the answer not in the manual?
Details the installation process for the stepper motor assembly.
Instructions for installing the phenolic resin plate-R on the X-axis.
Instructions for installing the phenolic resin plate-L on the X-axis.
Steps for installing phenolic resin plates B and F on the Y-axis.
Instructions for assembling the base structure of the CNC machine.
Guides the installation of bearing mounts onto the Y-axis guide rails.
Details the assembly and installation of the lead screw for the Y-axis.
Assembly and installation of the Y-axis running parts.
Instructions for installing aluminum nuts onto the frame.
Steps to install the aluminum workbench onto the base.
Preparation of phenolic resin plates for the X-axis (R and L).
General| Frame Material | Aluminum |
|---|---|
| Control | GRBL |
| Working Area | 300 x 180 x 45 mm |
| Supported OS | Windows, Linux |
| Control Software | Candle |
| Supported Materials | Wood, plastic, acrylic, PCB |
| Spindle | 775 spindle motor (12-48V DC) |
| Dimensions | 400 x 330 x 240mm (15.7 x 13.0 x 9.4") |
To Next Page
