SAJ eSolar RS485 - APP Configuration for Router Connection; Web Page Configuration: Hotspot Connection

- 10 -
④ Configure the router : select a valid router from the router list (E.g.: SAJ) as
shown in Figure 3-3 → Fill in “password” of the router → turn on “DHCP”
(default: open) → “save” the settings as shown in Figure 3-4. →“Connected”
successfully.
Figure 3-3 Figure 3-4
⑤ After connecting the WiFi module to the Internet, data of the inverter will be
uploaded to the server. Users can log into eSolar website or APP monitor to
monitor inverters remotely.
3.1.2 Web Page Configuration
① Connect WiFi module hot spot (eg.:DTU:XXXXX )