How to resolve Over Bus Voltage error on SAJ Inverter?
To troubleshoot an Over Bus Voltage error on your SAJ Inverter, verify the settings of the solar panel. A SAJ designer can assist you with this. If the settings are correct, contact your distributor or SAJ technical support.
What causes High Temperature Error on SAJ R5-3K-T2?
To troubleshoot a High Temperature Error on your SAJ Inverter, check if the radiator is blocked and ensure the inverter is operating within an appropriate temperature range. If these are normal, contact your distributor or SAJ technical support.
How to fix Null line-to-earth voltage fault on SAJ Inverter?
To address a Null line-to-earth voltage fault on your SAJ Inverter, check if the connection of the AC output grounding terminal is stable and reliable. If it is normal, contact your distributor or SAJ technical support.
What to do if my SAJ Inverter is showing Overcurrent error?
To troubleshoot an Overcurrent error on your SAJ Inverter, check the connection between the inverter and the grid. Also, test the grid voltage for stability. If these are normal, contact your distributor or SAJ technical support.
How do I troubleshoot a Frequency Error on my SAJ R5-3K-T2?
To address a Frequency Error on your SAJ Inverter, check the country setting and the frequency of the local grid. If both are normal, contact your distributor or SAJ technical support.
What to check if my SAJ Inverter displays a Grid Lost Error?
To resolve a Grid Lost Error on your SAJ Inverter, check the connection status between the AC side of the inverter and the grid. If the connection is normal, contact your distributor or SAJ technical support.
What causes ISO Error on SAJ R5-3K-T2 and how to solve it?
To troubleshoot an ISO Error on your SAJ inverter: * Check the insulation resistance on the positive and negative sides of the solar panel. * Make sure the inverter isn't in a damp environment. * Confirm the inverter's grounding is secure. If these checks are normal, contact your distributor or SAJ technical support for assistance.
How to fix GFCI Error on SAJ R5-3K-T2?
To resolve a GFCI Error on your SAJ inverter: * Check the insulation resistance of both the positive and negative sides of the solar panel. * Ensure the inverter is not in a wet environment. * Verify the inverter's grounding. If these checks are normal, contact your distributor or SAJ technical support.
General| Start Voltage | 150 V |
|---|---|
| Number of MPPTs | 2 |
| Max. Input Current per MPPT | 12.5 A |
| Rated AC Power | 3000 W |
| Max. AC Power | 3300 W |
| Rated AC Voltage | 230 V |
| Rated Grid Frequency | 50 Hz / 60 Hz |
| THDi | <3% |
| European Efficiency | 97.0% |
| DC Switch | Yes |
| Protection Degree | IP65 |
| Cooling Method | Natural Convection |
| AC Voltage Range | 180 V - 276 V |
| Power Factor | 0.8 leading...0.8 lagging |
| Operating Temperature Range | -25°C to +60°C |
| Communication | RS485, Wi-Fi |
| Humidity | 0% - 100% |
| Max. DC Power | 4500 W |
To Next Page
