Suntrio Plus Series
-28-
DC connector is made up of the positive connector and the cathode connector
1. Insulated Enclosure 2. Lock Screw 3. Positive Connector
Figure 5.6 Positive Connector
1. Insulated Enclosure 2. Lock Screw 3. Cathode Connector
Figure 5.7 Cathode Connector
NOTICE
·Please place the connector separately after unpacking in order to avoid confusion for connection
of cables.
·Please connect the positive connector to the positive side of the solar panels, and connect the
cathode connector to the cathode side of the solar side. Be sure to connect them in right position.
Connecting Procedures:
(1)Tighten the lock screws on positive and cathode connector.
(2)Use specified strip tool to strip the insulated enclosure of the positive and
cathode cables to the appropriate length.
1.Positive Cable 2. Cathode Cable
Figure 5.8 Connecting Cables
To Next Page
Loading...
