Sako SKI780 - Page 41

6.1 Brief introduction of function code
P8 Auxiliary Functions
Function Parameter ,
Code Name Setting Range Default |Property
P8-00 | JOG running frequency O.00F ze maximuny 2.00Hz w
frequency
P8-01 | JOG acceleration time 0.0s ~ 6500.0s 20.0s Ww
P8-02 | JOGdeceleration time | 0.0s ~ 6500.0s 20.0s big
P8-03 | Acceleration time 2 0.0s ~ 6500.0s _— Ww
dependent
P8-04 | Deceleration time 2 0.0s ~ 6500.0s Model *
dependent
P8-05 | Acceleration time 3 0.0s ~ 6500.0s Moat} w
dependent
Model
P8-06 | Deceleration time 3 0.0s ~ 6500.0s *
dependent
P8-07 | Acceleration time 4 0.0s ~ 6500.0s Model Ww
dependent
‘ Model
P8-08 | Deceleration time 4 0.0s ~ 6500.0s bxe
dependent
P8-09 | Jump frequency 1 poe Sm 0.00Hz Ww
requency
P8-10 | Jump frequency 2 O-00nzcemaxinum 0.00Hz *
frequency
P8-11 Frequency jump 0.00Hz ~ maximum 0.01Hz a
amplitude frequency
pean | Ponvand/Reverss 0.0s ~ 3000.0s 0.0s te
rotation dead-zone time
P8-13 | Reverse control 0:Enabled 1: Disabled 0 *
35 \wwwsakohzcom