Sako SKI780 - Page 42

6.1 Brief introduction of function code
P8 Auxiliary Functions
Function Parameter 7
Code Name Setting Range Default | Property
Running mode when set Be unas aueney
P8-14 | frequency lower than 1: Stop 0 Ww
frequency lower limit 2:Runaeeare'speatl
P8-15 | Droop control 0.00Hz ~ 10.00Hz 0.00Hz
P8-16 Accumulative power-on Oh ~ 65000h Oh se
time threshold
P8-17 Accumulative running time Oh ~ 65000h Oh
threshold
P8-18 | Startup protection 0:No 1:Yes 0
P8-19 Frequency detection value | 0.00Hz~ maximum 50.00Hz
(FDT1) frequency
Frequency detection 0.0% ~ 100.0%(FDT1 °
menat hysteresis (FDT hysteresis 1) | electrical level) 5.0% *
Detect f 0.0% ~
PBz:2T [aor SnOMTANEE SO 100.0%(maximum 0.0% +
frequency reached fi
requency)
Jump frequency during 0: Disabled
P8:22 acceleration/deceleration | 1: Enabled o *
Frequency switchover point ~
P8-25 | between acceleration time 1 0.0 eemeximum 0.00Hz Ww
frequency
and acceleration time 2
Frequency switchover point oes
P8-26 | between deceleration time oe maximum 0.00Hz *
1 and deceleration time 2 q y
P8-27 | Terminal JOG preferred 0: Disabled 1: Enabled 0 w
www sakohzcom/ 36