Sako SKI780 - Page 43

6.1 Brief introduction of function code
P8 Auxiliary Functions
Function Parameter P
Code Name Setting Range Default | Property
P8-28 Frequency detection value | 0.00Hz~ maximum 50.00Hz fi
(FDT2) frequency
Frequency detection 0.0% ~ 100.0% (FDT2
ree hysteresis (FDT hysteresis 2) | electrical level) 20% *
P8-30 Any frequency reaching 0.00Hz ~~ maximum 50.00Hz Bs
detection value 1 frequency
P8-31 Any frequency reaching 0.0% ~ 100.0% 0.0% Ee
detection amplitude 1 (maximum frequency)
P8-32 Any frequency reaching 0.00Hz ~ maximum 50.00Hz ae
detection value 2 frequency
P8-33 Any frequency reaching 0.0% ~ 100.0% 5.0% spe
detection amplitude 2 (maximum frequency)
yw )9,
P8-34 | Zero current detection level o.Ce~S00. Ob rated 5.0% Ww
motor current
pags | Zerocurentdetecton § =| b+ 600.008 0.10; | x
delay time
Outgurovercurent 0.0% (no detection)
P8-36 P 0.1%-300.0% (rated 200.0% *
threshold
motor current)
peasy | Cutputovercurrent 0.00s ~ 600.00s 0.00s | xk
detection delay time
Of — 0)
P8-38 | Any current reaching 1 U.0%6-200.0% (fated 100.0% Ww
motor current)
py ~ J,
P8-39 Any current reaching 1 0.0% ~ 300.0% (rated 0.0% se
amplitude motor current)
py ~~ 9
P8-40 | Any current reaching 2 OlGHosesa00:0% (rated 100.0% w
motor current)
37 \wwwsakohzcom