Sako SKI780 - Page 44

6.1 Brief introduction of function code
P8 Auxiliary Functions
Function Parameter 7
Code Name Setting Range Default | Property
P8-41 Any current reaching | 0.0% ~ 300.0% (rated motor 0.0% fi
2 amplitude current)
P8-42 | Timing function 0: Disabled 1: Enabled 0 Ww
0: P8-44
1: All
2: Al2
P8-43 Timing duration 0 de
source 3: Panel potentiometer
(analog input corresponds to
the value of F8-44)
P8-44 | Timing duration 0.0Min ~ 6500.0Min 0.0Min
pgs | Allinputvoltage | 9 ogy ~ pg.46 3.10V
lower limit
pg.4g |Allinputvoltage — | pg. 45 ~ 10.00V 6sov | xk
upper limit
P8-47 IGBT temperature o°c~ 100°C 75°C a
threshold
Dormant frequency (P8-51) ~
P8-49 | Wakeup frequency maximum frequency (P0-10) 0.00Hz Ww
P8-50 | Wakeup delay time 0.0s ~ 6500.0s 0.0s Ww
P8-51 | Dormant frequency O.00Hz~wakeup frequency: 0.00Hz Ww
(P8-49)
P8-52 | Dormantdelaytime | 0.0s ~ 6500.0s 0.0s bx¢
pg.53 | Current running time | 9 9 6500.0 min 0.0Min} xk
reached
pg.s4_ | Output power 0.00% ~ 200.0% 100.0%] 4
correction coefficient
www sakohzcom/ 38