Sako SKI780 - Page 55

6.1 Brief introduction of function code
PC Multi-Reference and Simple PLC Function
Function Parameter ,
Cade Name Setting Range Default | Property
Unit's digit (Retentive
upon power failure)
0: No
PC-17 | Simple PLC retentive selection 1 Yes 00 w
Ten's digit (Retentive
upon stop)
0: No
1: Yes
pcg | Runningtimeofsimple PLC | 9 4.14) ~ 6553.5s(h) | 0.0s(h) | 3
reference 0
Acceleration/deceleration
PCL) time of simple PLC reference 0 o~3 0 *
pc-29 | Runningtime of simple PLC | 4 o.(4) ~ 6553.5s(h) | 0.0s(h) |
reference 1
Acceleration/deceleration
a time of simple PLC reference 1 ve 0 *
pc-22 | Runningtimeofsimple PLC | 9 o.4) ~ 6553.5s(h) | 0.0s(h) | ox
reference 2
Acceleration/deceleration
PO23 time of simple PLC reference 2 oN 0 *
pc-24 | RunningtimeofsimplePLC | 9 o.4) ~ 6553.5s(h) | 0.0s(h) | ox
reference 3
Acceleration/deceleration
Powe time of simple PLC reference 3 os 0 *
pc-2g_| Running time ofsimplePLC | 9 o.(h) ~ 6553.5s(h) | 0.0s(h) | 3
reference 4
PC-27 Acceleration/deceleration 0~3 0 es
time of simple PLC reference 4
49 \wwwsakohzcom