Sako SKI780 - Page 61

6.1 Brief introduction of function code
AO Torque Control Parameters
Function Parameter
Code Warn Setting Range Default | Property
A0-00 Speed/Torque control 0: Speed control 0 46
selection 1: Torque control
0: Digital setting (AO-03)
1: All
2: Al2
3: Panel potentiometer
4: HDI pulse setting (DI5)
AO-01 Torque setting source. in 5: Communication setting 0 *
torque control
6: MIN(AI1,AI2)
7: MAX(AIL,AI2)
Full range of values 1-7
corresponds to the digital
setting of A0-03.
ao-03 | Torque digital setting in | 99 09 ~ 200.0% 150.0% | sx
torque control
Forward maximum 0.00Hz ~ maximum
AO-05 | frequency in torque fr 50.00Hz Ww
requency
control
Reverse maximum 0.00Hz ~ maximum
AO-06 | frequency in torque 3 50.00Hz w
frequency
control
poor | eeometstonamein 0.00s ~ 65000s 0.00s |
torque control
og | eceeretoneimern 0.00s ~ 65000s 0.00s *
torque control
55 \wwwsakohzcom