Sako SKI780 - Page 62

6.1 Brief introduction of function code
AS Control Optimization Parameters
Function Parameter :
Coda Naina Setting Range Default | Property
AS-00 DPWM switchover 5.00Hz ~ maximum 8 00Hz oe
frequency upper limit | frequency
0: Asynchronous
A5-01 | PWM modulation mode | Modulation 0 *
1: Synchronous
modulation
Dead zone 0: No compensation
A5-02 | compensation mode : P 1 Ww
1: Compensation mode 1
selection
0: Random PWM invalid
A5-03 | Random PWM depth 1 ~ 10: PWM carrier 0 Ww
frequency random depth
: 0: Disabled
A5-04 | Rapid current limit 1 Enabled 1 w
A5-05 Current detection 0~100 5 se
compensation
A5-06 | Undervoltage threshold | 210 ~ 420V 350V *
e SVC optimization mode | 1: Optimization mode 1
AS-O7 selection 2: Optimization mode 2 7 *
Dead-zone time
AS-08 100% ~ 200% 150% *
adjustment
Model
A5-09 | Overvoltage threshold | 200.0V ~ 2500.0V *
dependant
www.sakohz.com/ 56