15
P0 Standard Function Parameters
Function
Code
Parameter
Name
Setting Range Default Property
P0-07
Frequency
source
superposition
selection
Unit's digit (Frequency source
selection)
0: Main frequency source X
1: X and Y operation
(operation relationship determined by
ten's digit)
2: Switchover between X and Y
3: Switchover between X and "X and Y
operation"
4: Switchover between Y and "X and Y
operation"
Ten's digit (X and Y operation
relationship)
0: X+Y
1: X-Y
2: Maximum
3: Minimum
00 ☆
P0-08
Preset
frequency
0.00Hz ～ maximum frequency (P0-10) 50.00Hz ☆
P0-09
Rotation
direction
0: Same direction
1: Reverse direction
0 ☆
P0-10
Maximum
frequency
5.00Hz ～ 500.00Hz 50.00Hz ★
P0-11
Source of
frequency
upper limit
0: Set by P0-12
1: AI1
2: AI2 local potentiometer
3: AI3 panel potentiometer external
keyboard potentiometer
4: HDI pulse setting
5: Communication setting
0 ★
P0-12
Frequency
upper limit
Frequency lower limit (P0-14) to
maximum frequency (P0-10)
50.00Hz ☆
6.1 Brief introduction of function code
To Next Page
Loading...
