Sako V780 - Page 36

30
P6 Start/Stop Control
Function
Code
Parameter
Name
Setting Range Default Property
P6-00 Start mode
0: Direct start
1: Rotational speed tracking restart
2: Pre-excited start (asynchronous
motor)
0 ☆
P6-01
Rotational
speed tracking
mode
0: From frequency at stop
1: From power frequency
2: From maximum frequency
0 ★
P6-02
Rotational
speed tracking
speed
1 ～ 100 20 ☆
P6-03
Startup
frequency
0.00Hz ～ 10.00Hz 0.00Hz ☆
P6-04
Startup
frequency
holding time
0.0s ～ 100.0s 0.0s ★
P6-05
Startup DC
braking current/
Pre-excited
current
0% ～ 100% 0% ★
P6-06
Startup DC
braking time/
Pre-excited time
0.0s ～ 100.0s 0.0s ★
6.1 Brief introduction of function code