Salente Cuco - Page 74

74
Please contact customer service for a replacement fuse.
11. The LED display shows
E4 error.
Unplug the power cord from the wall outlet. Wait
approximately 15 minutes. Plug the power cord back into
the wall outlet. Press "CANCEL" button on the pressure
cooker. Select cooking process to begin cooking.
12. My food is burned at
the bottom of the inner pot.
There is not enough liquid in the inner pot. Add more liquid
to your inner pot contents.
PROBLEM POSSIBLE REASON SOLUTION
13. I'm having trouble
closing the lid.
Sealing ring improperly
installed.
Re-position the sealing ring.
Float valve in the UP
position.
Gently push the Float valve
down.
14. I'm having trouble
opening the lid.
Pressure has not been fully
released.
Gently turn the Pressure
limiting valve to EXHAUST to
release remaining pressure.
Float valve in the UP
position.
Gently push the Float valve
down.
15. A lot of steam
keeps shooting out
from the valve during
cooking.
The valve is in EXHAUST
position.
Move the Pressure limiting
valve to AIRTIGHT position.
16. Display shows E3. Overheating is detected.
Press CANCEL to stop
cooking and check if food at
the bottom of the inner pot is
burnt.
17. Display is blank
after plugging in
power cord.
Bad power connection or no
power.
Check the power cord from
the pressure cooker to the
wall outlet to ensure a good
connection.