16 VS05 Installer Manual
LED indication when following Group Master
Slide switch must be in “A” position to follow group master VS10
If you do not want a VS05 to follow the group master VS10 please select or see page XX
To reduce annoyance factor ,no Led is
shown when the Group master is in
reduced temperature/night time mode.
See below
To adjust reduced temperature oset
please refer to page XXXXXX
Amber LED means that
the unit is calling for heat in
Reduced/night time mode.
The group master will show :
1.
2.
VS10 Group Master Display
For more details on VS10
please refer to VS10 manual
To Next Page
Loading...
