RT300RF INSTRUCTION MANUAL
14
AFTER INSTALLATION
The following table shows the settings of the RT300RF digital thermostat
after Power on, or after RESET is pressed:
Function Status After Reset or Power On
Operation Mode Normal mode
Room Temperature 22.0 °C, updated within 5 seconds
Set Point Temperature 20.0 °C
Frost Protection indicator Off
Heat indicator Off
Low-Battery Warning indicator Off, updated within 5 seconds
Output Relay Off
After Power on, the thermostat will operate in Normal mode (Normal mode
is when the thermostat is displaying the room temperature):
•
The set point temperature is reset to the default setting
•
The room temperature display is updated within 5 seconds
•
The control process starts
Salus RT300RF Manual 002_89 22/07/2013 09:19 Page 14
To Next Page
Loading...
