Salus RT500 User Manual

Press the SELECT key to confirm the Weekday or Weekend selection. Once
this is set, the ‘Hour’ will flash to indicate that it is the selected item and is
the next item to be adjusted:
Press the UP or DOWN key to
adjust the hour setting to the
desired value, and confirm your
selection by pressing the SELECT
key.
Pressing the SELECT key allows you to step through each of the items to be
reviewed or adjusted within the programmes in the following sequence:
Programme Function Sequence
1 Hour Minutes Set point temperature
2 Hour Minutes Set point temperature
3 Hour Minutes Set point temperature
4 Hour Minutes Set point temperature
5 Hour Minutes Set point temperature
…before then allowing you to cycle back to Programme 1. Pressing the SET
key at any time will confirm the setting and return to the programme set
selection.
RT500 INSTRUCTION MANUAL
12
Salus RT500 Manual 002:89 23/11/10 11:06 Page 12

Salus RT500 Specifications

General

Display	LCD
Power Supply	2 x AA Batteries
Temperature Range	5°C to 30°C
Programming	7-day programmable
Compatibility	Compatible with most heating systems