Salus RT520RF User Manual

30
7. Test the pairing process
Using or , select TEST
and press .
Press
.
Using
or , navigate to
PAIRING submenu and press .
The testing process takes
up to 10 minutes.
The red LED and the green LED on the
receiver will begin to flash.
It is important to place the receiver and transmitter in places where nothing interferes with the radio signal. The range of communication between the
transmitter and the receiver in an open area is up to 60m. The radio transmission is inuenced by many factors that can shorten the working distance, such
as thick walls, drywall covered with aluminum foil, metal objects such as cabinets, general radio interference, etc. However, the range is sucient for most
domestic use. It is recommended to test the radio transmission between devices before mounting the regulator on the wall. The test can be performed by
changing the set temperature, i.e. by activating or deactivating the heating.
1 2 3
4 5
3

Salus RT520RF Specifications

General

Display	LCD
Temperature Range	5°C to 35°C
Power Supply	2 x AA Batteries
Frequency	868 MHz
Frost Protection	Yes
Mounting	Wall-mounted
Wireless	Yes
Voltage	3 V DC
Switching Current	3 A
Temperature Control Accuracy	±0.5°C
Programmable	Yes, 5/2 day or 7 day programming
Operating Modes	Manual, Holiday
Communication	RF Communication
Battery Life	2 years
Dimensions	120 mm