Sam4s ER-280 SERIES - Product Specifications; Specifications

SAM4S ER-280 SERIES 2-1
2 Product Specifications
Specifications are correct at the time of printing. Product specifications are subject to change without notice.
See below for product specifications.
2-1 Specifications
Item Description Remark
Processor
• MITSUBISH M16C/80 Group M30800SFP (16 Bit)
Memory
• RAM (System Memory)
SRAM (K6T4008C2E) : 4MBITs (Default)
SRAM (K6T4008C2E) : 4MBITs (Option)
• ROM (Selectable)
FLASH ROM(AM29F800) : 8MBITs
EPROM(27C4001) : 4MBITs
• FISCAL ROM
EPROM(27C1001) : 1MBITs (Default)
EPROM(27C2001) : 2MBITs (Option)
• SD CARD
SD / SDIO Protocol V1.0 Compatible, Recommend 1Gbyte
Battery
• Type : MS Lithium, 3.0V 11mAh
• Part Name : MS920S
• Charging Time : 24 Hours
• Life : 3 Years
Data Storage
• 60 Days (When battery is Full charged)
Serial
(RS-232C)
• Flow Control :
① DTR / DSR : H/W Flow Control
• Baud Rate : 1200 / 2400 / 4800 / 9600 / 19200 bps
• Connector : DB9P Female * 1 (Default)
: DB9P Female * 2 , RJ-11 (Option)
• Voltage Supply : VCC(+5V/150mA) supplies at 9Pin of Connector.
I/F PBA
Interface
USB
• Transfer Type : Bulk
• Speed : 12Mbps (Full Speed)
• Power : Self-Powered
I/F PBA
Option
MCR
• 2 Track : Track #1,#2 or Track #2,#3 / ISO7810,7811,7812
• Reading Method : F2F
• Operating Speed : 10 ~ 150 [Cm/Sec]
Option
Display
• Operator Display : 10 Digits VFD or LCD(16 * 2Line Character Type)
• Customer Display : 10 Digits VFD
Keyboard
• 49-Key (Raised Type): ER-280 Series
• 49-Key (Flat Type)
: ER-285 Series
Drawer
• 5B5C / 4B8C
Aplus-DRAWER
Power Consumption
• Regularity : Approx. 20W
Power Requirement
• AC 120V 60Hz, 230V 50Hz
Environment Condition
• Temperature : 0℃ ~ 40℃
• humidity : 30% ~ 80% RH
Dimensions(mm)
• 430(W) X 450(D) X 242(H)
With Middle Drawer
Weight
• 10.3kg (Set Only), 11.5kg (with Packing)
With Middle Drawer