Sam4s ER-285 - Item and Receipt Configuration; Assigning Item Groups; Modifying Receipt Header Text

III. Assign a description to the item
1. turn the key to the P position
2. enter 300, then press SUBTOTAL
3. scan the item or press the button on the keyboard
4. place the alpha overlay (found under the keyboard) on
the keyboard and enter up to 18 characters
5. press the X/TIME button
6. press CASH
Assigning Item Groups
You can track sales on item categories by assigning groups.
Items assigned to groups will be added to the group total on the
end of day reports.
If you do not know the group numbers and descriptions set up
in your register, begin at step 1. If you know the group
numbers, you can skip to step 5
1. Turn the key to the PGM position
2. Enter 15 Subtotal
3. Press 0 X/TIME
4. Press CASH. This will print a list of all groups in the
register. You will reference these group numbers
below.
5. With the key in PGM, Enter 150 Subtotal
6. Press an item button or scan the barcode
7. Enter the group number (G) you want to assign to the
item as indicated on the group list.
8. Press 00 00 X/TIME
9. Repeat steps 6-8 for additional items
10. Press CASH to finalize the program
Receipt Header Change
To add/change the description in the receipt header
11. turn the key to the P position
12. enter 700, then press SUBTOTAL
13. enter the line number (L) you wish to change (1-6) and
then press X/TIME
14. use the alpha overlay to enter the description (up to 32
characters) and press SUBTOTAL
15. press CASH to finalize
0
3
0
SUB
TOTAL
NEW
ITEM
CASH
X/TIME
0 7 0
SUB
TOTAL
X/TIME
L
CASH
SUB
TOTAL
5 1
SUB
TOTAL
X/TIME
0
CASH
SUB
TOTAL
CASH
5 1 0
X/TIME
(G)
BOTTLE
WATER
2
22
2466216
466216466216
4662166123
61236123
6123
or
00 00