Sam4s ER-430 SERIES - Initial Clear

3 Installation and Operation
SAM4S ER-430 SERIES 3-5
3-3-2 Key Board Matrix (Dealer Option)
Figure3-5 Key Board(STD)
3-3-3 Initial Clear
1. Turn off the power switch.
2. Turn the mode switch marked ‘P’ to P-MODE.
3. Hold down the ‘SBTL’ key on the keyboard and turn on the power switch at the same time.
Figure3-6 Initial Clear Key & Print Sheet
05/27/2006 TIME 16:10
= = = = = = = = = = = = = = = = = = = = = = =
INITIAL CLEAR OK!
= = = = = = = = = = = = = = = = = = = = = = =
No.000036
CLERK 00 00000