Sam4s ER-5100? SERIES - 3-2-4 RS-232 C Serial Cable Installation

3. Installation and Operation
3-4 SAM4S ER-5100II SERIES
3-2 Installation & Option
3-2-4 RS-232C Serial Cable Installation
1. Connect the RS-232C serial cable to the RS-232C serial port on the right side of ECR.
2. Secure the serial cable with screws.
3. Connector the other end of the RS-232C serial Cable to your host computer.
3-2-5 Options
No. Item Description Remark
1 Water Proof -
2 Dust Cover -
3 Memory SRAM 4MBITs (4MBITs * 1) - Factory Option On Main PBA
4 Fiscal Function Fiscal B’d & Control Chip - Factory Option On Main + Fiscal PBA
5 Clerk Key Clerk Key(5EA, 15EA) - Factory/Dealer Option
6 Paper Near-End Sensor Mechanical Switch (R,J) - Factory Option
Table 3-1 Option
3-2-6 Supplies
No. Item Description Remark
1 Paper Roll 2 EA
2 Mode Key VD, REG, X, Z, P, C
3 Drawer Key 2 EA
4 User Manual 1 EA
5 Spool 1 EA
Table 3-2 Supplies