To Next PageTo Next Page
Need help?Do you have a question about the SAME SILVER 90 and is the answer not in the manual?
General| Type | Tractor |
|---|---|
| Engine | SAME 1000.4 WT |
| Engine Cylinders | 4 |
| Power (hp) | 90 |
| Max speed | 40 km/h |
| Engine Power | 90 hp |
| Engine Type | Diesel |
| Transmission | Mechanical |
| PTO Power | 75 hp |
| Displacement | 3.9 L |
| Fuel Tank Capacity | 120 l |
Overview of engine types, specifications, and performance data for different models.
Explanation of the System for Automatic Braking and Traction control functions.
Overview and technical details of the braking system.
Information on controlling the electronic power-lift system.
Overview and technical data for the hydrostatic power steering system.
General information, specifications, and controls for the hydrostatic steering system.
Explanation of electrohydraulic controls for differential lock, 4WD, PTO, and transmission.
Details on the multifunction control handset, its buttons, and functions.
Description of auxiliary hydraulic spool valves and their controls.
Information on the trailer hydraulic braking system and its distributor unit.
Information about the tractor's electrical system, including components and general specifications.
Detailed technical data for Agroshift clutches and speed reducers.
Overview of transmission types, speed ranges, and ratios.
Diagrams illustrating 4-speed synchromesh gearboxes with different ranges and options.
Details on the HYDRIVE system, its control lever, and EPROM updating procedures.
Technical diagrams of the rear axle for different SILVER models.
Checking and adjusting the pressure relief valve setting.
Procedure for bleeding air from the hydraulic steering circuit.
General information and specifications for the vehicle's braking system.
Details on the electronic power-lift system, its components, and operation.
General information and specifications for the front hydraulic lift system.
Overview and technical specifications for the front PTO clutch and related components.
Description of the original load sensing hydraulic power-lift system.
Procedure for adjusting service brake pedal position for optimal operator comfort.
Description of the electronic control unit and its operator panel.
How to adjust work depth using the control knob.
How to adjust system responsiveness using the knob.
How to adjust the speed of implement descent.
Operation of the raise and lower switch for lift arms.
How to use the STOP button to immobilize lift arms.
Procedure for setting the maximum lift height using a reference value.
Functionality of the lock and unlock button for system control.
Description of EPROM fault alarms and their remedies.
Information on position sensor disconnection alarms and checks.
Details on solenoid valve short circuit alarms and troubleshooting.
Information on UP solenoid valve disconnection alarms.
Information on DOWN solenoid valve disconnection alarms.
Correct procedure for setting up the electronic lift system and checking electrical components.
Initial setup procedure for the steering sensor on SBA system machines.
Verifying operational efficiency of lift system electrical components.
Technical specifications for the front PTO clutch and related components.
Troubleshooting causes and solutions for clutch slippage.
Troubleshooting causes and solutions for clutch disengagement issues.
Overview of the hydrostatic steering system and its operation.
Operation of front and rear differential locks using console buttons.
Engagement and disengagement procedure for four-wheel drive.
Explanation of the SBA System activation and function.
Operation of the electrohydraulically operated front PTO clutch.
Operation of the rear PTO clutch, mechanical or electrohydraulic.
Critical procedure for updating the EPROM of the control unit.
