5
Equipment identification
5.1
Standards applied
5.2
Description of the ATEX
Each device is marked with the name of the manufacturer, the
reference of the device and the important information for the use of
the
device (air pressure, electrical power...).
The
equipment
ha
su
design
as per
à t
ATEX Directive 2014/34/EU and are intended for use in Zone 1.
CE: European conformity
II 2
G
: Use in explosive areas
II:
Group
II
2: Category 2
surface equipment intended for use in an environment in which
explosive atmospheres due to gases, vapours or mists are likely to occur
occasionally during normal operation.
G: gas
Ex h IIB T6
Ex Marking of conformity to European standards h: Type of
protection for non-electrical equipment IIB:
Reference
gas for equipment qualification
T6: Temperature class
- Maximum surface temperature: 85°C
Gb: Equipment protection level (zone 1 gas)
Special conditions apply for safe use. Refer to the requirements in the
instruction manuals accompanying this product.
X
Maximum air supply pressure to the gun
Maximum fluid pressure at gun inlet
N
um
be
r
g
iv
e
n
by
S
A
M
E
S
K
R
E
M
L
I
N
.
The first two digits indicate the year of manufacture.
27
ATEX Directive
To Next Page
Loading...
