What to do if powder does not adhere to the part with my SAMES KREMLIN Inogun M Paint Sprayer?
If the powder isn't sticking to the part, there could be a high voltage issue. Check the electrical connections of the UHT. It may be due to a bad connection of the HVU from assembly/disassembly or a cut low voltage cable. If that's not the issue, try reverting to the 'factory' settings and changing the low voltage cable.
How to fix powder flow drop in SAMES KREMLIN Inogun M?
A drop in powder flow can occur due to several reasons. The powder duct may be soiled, in which case you should disassemble the gun and either clean or change the duct. Another cause might be a plugged powder supply hose; clean it with compressed air. If the powder pump is experiencing wear and tear or clogging, refer to the powder pump instruction manual.
Defines the configuration of the certified equipment.
Lists the standards the Inogun M gun is designed according to.
Details the classification and marking of the Inogun M and M+ guns.
Information operators must understand before using the spray gun for safety.
Contains critical safety warnings and cautions for operating the equipment.
Outlines regulatory tests required for the spraying equipment as per EN 50050-2.
Provides key recommendations regarding ventilation, seals, and ambient temperature.
Details the terms and conditions of the product guarantee, including exclusions.
Presents the physical dimensions of the Inogun M gun in millimeters and inches.
Lists technical specifications such as operating temperature, altitude, weight, voltage, and pressure.
Details the required quality characteristics for compressed air according to NF ISO 8573-1.
Illustrates and details the electrical connections between the gun and control modules.
Explains how to adjust powder flow and program selection using the gun's controls.
Lists the necessary tools and additional accessories required for installation and maintenance.
Provides step-by-step instructions for installing an optional extended nozzle onto the gun.
Details the steps for attaching an optional counter-electrode to the spray gun.
Provides a summary table of preventive and corrective maintenance operations with details and frequencies.
Outlines the procedure for cleaning the spray gun using compressed air, emphasizing safety precautions.
Details the steps for cleaning the electrode support and deflector, including checking O-rings.
Provides instructions for replacing the fixing hook on the spray gun.
Explains the process for removing and replacing the trigger mechanism of the spray gun.
Guides through the process of disassembling and reassembling the barrel and handle of the spray gun.
Details the steps for replacing the High Voltage Unit (HVU) in the spray gun.
Describes how to replace the O-rings on the air connector of the spray gun.
Explains the procedure for extracting and reassembling the powder duct.
Provides step-by-step instructions for replacing the low voltage cable of the spray gun.
Details the steps for removing and replacing the control box within the spray gun handle.
Lists spare parts for the Inogun M spray gun, including part numbers and descriptions.
Lists spare parts specific to the Inogun M+ spray gun, including part numbers and descriptions.
Details the components and part numbers for the barrel assembly of the spray gun.
Lists the parts and part numbers associated with the handle assembly of the spray gun.
Details the components and part numbers for the flat spray electrode support.
Lists parts and specifications for optional extended flat spray nozzles.
Details spare parts for round spray deflectors and electrode supports.
Lists parts and specifications for optional extended round spray nozzles.
Lists the parts and part numbers for the counter-electrode assembly.
Details the components included in the kit to convert a flat spray to a round spray.
Details the components included in the kit to convert a round spray to a flat spray.
Lists additional equipment such as air filters and unions required for the system.
General| Brand | SAMES KREMLIN |
|---|---|
| Model | Inogun M |
| Category | Paint Sprayer |
| Language | English |
To Next Page
