35
10.1
Transport
Put the product in its original packaging during transport.
The packaging of the gun corresponds to the transport conditions provided
for this purpose.
The packaging protects :
-
Damage related to transport.
-
Corrosion.
10.2
Storage
Our equipment must be stored in its original packaging.
In the event of prolonged storage, it is advisable to carry out preventive
maintenance on all lubricants before commissioning.
Storage before installation
Ambient storage temperature 0 / +50 °C.
-
Protect the unit from dust, water runoff, moisture, vibration and
shock.
-
Do not remove the packaging until just before assembly.
Storage after installation
-
Protect the unit from dust, water run-off, moisture and
impact.
-
Do not store more flammable products than necessary within
the work area.
-
These products must be stored in approved, grounded
containers.
-
Use only grounded metal buckets for flushing solvents.
C
a
r
dbo
a
r
d
a
n
d
pa
pe
r
a
r
e
t
o
be
ba
nn
ed
.
I
n
deed
t
h
e
y
-
are very bad conductors, even insulators.
To Next Page
Loading...
