Staff qualification
Work on the gun may only be carried out by trained and qualified
personnel in accordance with the applicable legal regulations and
requirements.
The following conditions must be met:
-
The personnel must have special skills and experience in the
relevant technical field. This applies in particular to
maintenance and repair work on devices relating to the A28
gun.
Personnel must be familiar with the applicable standards,
-
guidelines, accident prevention regulations and operating
conditions.
Personnel must be authorized by the Safety Officer to perform
-
the required tasks.
Personnel must be able to recognize and avoid potential
-
hazards.
The required qualifications of the personnel are subject to
-
different legal regulations depending on the site of
implementation. The owner must ensure compliance with the
applicable laws.
Qualified personnel must be familiar with the product safety
-
data sheets that they will be required to use in the operation
of
the A28.
To Next Page
Loading...
