How to fix SAMIX® ES500 Industrial Equipment that cannot be switched on?
If the SAMIX® ES500 Industrial Equipment cannot be switched on, check whether there is supply voltage and the connector is correctly connected to the socket.
Why can't I screw the jar into the oscillation arm of my SAMIX ES500?
If the incorrect mixing blade is used with the SAMIX® ES500 Industrial Equipment and the mixing blade shaft is too long preventing the jar from screwing into the oscillation arm, use a mixing blade with a suitable shaft length.
What does fault FE 2 mean on SAMIX ES500?
If the SAMIX® ES500 Industrial Equipment displays fault FE 2, it means the oscillation arm does not move or only moves very slowly. Press the "Start/Stop" button. Fault message FE 0 is displayed.
What does fault FE 8 mean on SAMIX® Industrial Equipment?
If the SAMIX® ES500 Industrial Equipment displays fault FE 8, it means no mixing unit is engaged in MANUAL operating mode. To resolve this, press the "Start/Stop" button, engage the mixing unit, and restart.
What does fault FE 1 mean on SAMIX® Industrial Equipment?
If the SAMIX® ES500 Industrial Equipment displays fault FE 1, it means the device was switched on while a mixing unit is engaged, or a changeover of operating modes was effected while a mixing unit was engaged. To resolve this, remove the mixing unit and press the "Start/Stop" button. The oscillation arm moves to the previously desired position.
What does fault FE 9 mean on SAMIX ES500?
If the SAMIX® ES500 Industrial Equipment displays fault FE 9 in AUTO operating mode and no mixing unit is secured at the oscillation arm, the oscillation arm automatically moves back to the start position. If no mixing unit is engaged or disengaged, remove the mixing unit and press the "Start/Stop" button.
What does fault FE A mean on SAMIX ES500 Industrial Equipment?
If the SAMIX® ES500 Industrial Equipment displays fault FE A, it means the engine is temporarily overloaded. Press the "Start/Stop" button. If necessary, switch off the device and allow the device to cool down for 30 minutes.
What does fault display FE 0 mean on SAMIX ES500 Industrial Equipment?
If the SAMIX® ES500 Industrial Equipment displays fault FE 0, it means the device was switched off and on again during an operation or a temporary power failure. To resolve this, press the "Start/Stop" button to move the oscillation arm to the next end position.
What to do if SAMIX® ES500 Industrial Equipment switched off due to an overload?
If the SAMIX® ES500 Industrial Equipment switches off due to an overload, switch off the power switch and wait for a cooling period of 30 minutes.
Details about the manufacturer, safety checks, and manual purpose for the SAMIX ES500.
Specifies the sole intended application for the SAMIX ES500 mixer.
Lists usages considered as foreseeable misuse for the SAMIX ES500.
Defines the recommended environmental conditions for SAMIX ES500 operation.
Information regarding warranty rights provided by the manufacturer.
Lists the items included in the SAMIX ES500 package.
Contact details for SAMIX GmbH customer support.
Explains the symbols and principles used for safety notices in the manual.
Provides essential safety guidelines and warnings for operating the SAMIX ES500.
Details about the built-in safety features of the SAMIX ES500.
Presents specifications, power consumption, dimensions, and protection types of the SAMIX ES500.
Lists the various components and accessories available for the SAMIX product line.
Information on the types of mixing blades (SMB, DSP) and their cleaning procedures.
Details about the types, sizes, and handling of SAMIX jars.
Guides on correctly matching mixing blades with specific SAMIX jars.
Instructions and precautions for safely lifting and transporting the SAMIX ES500.
Advice on storing the original packaging for potential future use.
Recommendations for storing the SAMIX ES500 under optimal environmental conditions.
Guidelines for choosing a suitable and safe location for the SAMIX ES500.
Steps for checking connections and powering up the SAMIX ES500 for the first time.
Instructions on performing a function check after initial setup.
Overview of the SAMIX ES500 control panel buttons and display functions.
Steps to assemble the jar and mixing blade for the mixing process.
Instructions for preparing the jar and lid after weighing ingredients.
Procedure for powering on the device and choosing AUTO or MANUAL mode.
Detailed steps for performing mixing operations in the automatic mode.
Guidelines for performing mixing operations in the manual mode.
Steps to check the ointment consistency and prepare the jar after mixing.
Contact information and warranty terms for SAMIX GmbH service in Germany.
Information on servicing the SAMIX ES500 by authorized personnel and service costs.
Instructions for safely cleaning the SAMIX ES500, including warnings and daily cleaning steps.
General guidance on identifying and resolving faults with the SAMIX ES500.
Lists common fault display codes (FE 0-FE A) and their corresponding troubleshooting steps.
Identifies potential user errors and their consequences, with troubleshooting advice.
Information on the proper disposal of SAMIX devices at the end of their service life.
General| Brand | SAMIX |
|---|---|
| Model | ES500 |
| Category | Industrial Equipment |
| Language | English |
To Next Page