Samson 3244 Operating Instructions

EB 8026 EN 43
Appendix
10 Appendix
10.1 After-sales service
Contact SAMSON's After-sales Service de-
partment for support concerning service or
repair work or when malfunctions or defects
arise.
E-mail
You can reach the After-sales Service De-
partment at aftersalesservice@samson.de.
Addresses of SAMSONAG and its subsid-
iaries
The addresses of SAMSON AG, its subsid-
iaries, representatives, and service facilities
worldwide can be found on the SAMSON
website, in all SAMSON product catalogs or
on the back of these Mounting and Operat-
ing Instructions.
Required specications
Please submit the following details:
− Order number and position number in
the order
− Type, model number, nominal size, and
valve version
− Pressure and temperature of the process
medium
− Flow rate in cu.ft/min or m³/h
− Bench range of the actuator (e.g. 0.2 to
1bar)
− Is a strainer installed?
− Installation drawing
10.2 Certicates
The declarations of conformity are included
on the next pages.

Samson 3244 Specifications

General

Brand	Samson
Model	3244
Category	Control Unit
Language	English