Samson 3724 User Manual

14-4 EB 8048-2 EN
SAMSON REGULATION S.A.S. · 1, rue Jean Corona · 69120 Vaulx-en-Velin, France · samson@samson.fr 1
EU
DECLARATION OF CONFORMITY DC03
3
2020-07
Declaration of Conformity of Final Machinery
in accordance with Annex Il, section 1. A. of the Directive 2006/42/EC
For the following products:
Pneumatic Control & Aseptic Angle Valve Type 3349-1/-7 consisting of the type 3349
Valve and Type 3271/Type 3277 Pneumatic Actuator or Type 3349 with Type 3379
Pneumatic Actuator
We hereby declare that the machinery mentioned above complies with all applicable requirements
stipulated in Machinery Directive 2006/42/EC.
For product descriptions of the valve and actuator, refer to:
 Type 3349 Valve: Mounting and Operating Instructions EB 8048-2/-3
 Types 3271 and 3277 Actuators: Mounting and Operating Instructions EB 8310-X
 Type 3379 Actuator: Mounting and Operating Instructions EB 8315
Valve accessories (e.g. positioners, limit switches, solenoid valves, lock-up valves, supply pressure
regulators, volume boosters and quick exhaust valves) are classified as machinery components in
this declaration of conformity and do not fall within the scope of the Machinery Directive as specified
in § 35 and § 46 of the Guide to Application of the Machinery Directive 2006/42/EC issued by the
European Commission. In the SAMSON Manual H 02 titled "Appropriate Machinery Components for
SAMSON Pneumatic Control Valves with a Declaration of Conformity of Final Machinery", SAMSON
defines the specifications and properties of appropriate machinery components that can be mounted
onto the above specified final machinery.
Referenced technical standards and/or specifications:
 VCI, VDMA, VGB: "Leitfaden Maschinenrichtlinie (2006/42/EG) — Bedeutung für Armaturen,
Mai 2018" [German only]
 VCI, VDMA, VGB: "Zusatzdokument zum „Leitfaden Maschinenrichtlinie (2006/42/EG) — Be-
deutung für Armaturen vom Mai 2018" [German only], based on DIN EN ISO 12100:201 1-03
Comment:
Information on residual risks of the machinery can be found in the mounting and operating instruc-
tions of the valve and actuator as well as in the referenced documents listed in the mounting and
operating instructions.
Persons authorized to compile the technical file:
SAMSON REGULATION SAS – 1 rue Jean Corona – FR-69120 VAULX-EN-VELIN
Vaulx-en-Velin, 30 July 2020
Michae
l Lachenal-Chevallet
R&D
Manager
Joséphine S
ignoles-Fontaine
Q
SE Manager

Samson 3724 Specifications

General

Brand	Samson
Model	3724
Category	Valve Positioners
Language	English