Samson 3730-3 - Referenced Standards and Regulations; Referenced Documentation

10 SH 8384-3 EN
Mounting, connection, and start-up
4 Mounting, connection, and start-up
Refer to Mounting and Operating Instructions u EB8384-3 on how to mount, perform the
electric and pneumatic connections as well as start up the positioner.
Only use the specied original mounting parts and accessories.
G
+81 -82 +11 -12
+83
-84 +51
-52
A2A3 A1
+41 -42
+31 -32
A
+31 -32
24VDC
Solenoid valve
(optional)
mA control
signal
Not Ex: Binary input of a PLC acc. to
IEC61131-2 (P
max
= 400mW) or switch-
ing amplier acc. to EN60947-5-6
Ex: Sw. amplier acc. to EN60947-5-6
A3
Fault alarm
Limit contacts
A2
Software
A1
Software
optionally
inductive
Position
transmitter with
two-wire
transmitter
supply unit
Leakage sensor
Analog input x
Binary input
Fig.2: Electrical connection