The results laid down in this test report refer exclusively to the test object and the technical documentation submitted. Test reports without signature
and seal are invalid. This test report may be reproduced unaltered only. Extracts or amendments shall require the prior approval of the Physikalisch-
Technische Bundesanstalt.
Physikalisch-Technische Bundesanstalt – Bundesallee 100 - D 38116 Braunschweig
Ptb.EC-6116-2.doc
Physikalisch-Technische Bundesanstalt
Braunschweig und Berlin
(12) The marking of the equipment shall include the following:
II 2G EEx d IIC T6
Zertifizierungsstelle Explosionsschutz Braunschweig, 30.04.1998
By order
(Signature) (Seal)
Dr.-Ing. U. Klausmeyer
Oberregierungsrat
To Next Page
Loading...