54 EB 6116 EN
Test Report PTB Ex .......................
The results laid down in this test report refer exclusively to the test object and the technical documentation submitted. Test reports without
signature and seal are invalid. This test report may be reproduced unaltered only. Extracts or amendments shall require the prior approval of
the Physikalisch-Technische Bundesanstalt.
Physikalisch-Technische Bundesanstalt – Bundesallee 100 - D 38116 Braunschweig
Ptb.EC-6116-2.doc
Physikalisch-Technische Bundesanstalt
Braunschweig und Berlin
T R A N S L A T I O N
A D D E N D U M N o.1
in compliance with the Directive 94/9/Ec Annex III Clause 6
to the EC Type Examination Certificate PTB No. 98 ATEX 1024 X
Equipment: Model 6116-2 i/p-Converter
Marking:
II G EEx d IIC T6
Manufacturer: SAMSON AG Mess- und Regeltechnik
Address: Weismüllerstr. 3
D-60314 Frankfurt, Germany
Description of the additions and modifications
1. The range of use of the equipment is extended to a lowest ambient temperature
of –45 °C.
2. The mounting and operating instructions for the equipment are supplemented by
the clauses specified under Section 4 of the examination documents.
Test Report: PTB Ex 01-11313
Zertifizierungsstelle Explosionsschutz Braunschweig, 08 January 2002
(Signature) (Seal)
#
Dr.-Ing. U. Klausmeyer
Regierungsdirektor
Page 1/1
To Next Page
Loading...