4: Mute switch - Move this switch in the direction of the arrow to mute the AH1; move it away from the arrow to unmute it and trans-
mit audio signal. Because the carrier signal remains during muting, no “pop” or “thud” will be heard. Note that turning this off does
not turn off the transmitter power—it is simply a way to temporarily mute the transmission of audio signal. If you don’t plan on using
the AH1 for extended periods, turn it off power by using the power on-off switch (see #5 below).
5: Power switch - Move this switch in the direction of the arrow to turn power to the AH1 on; move it away from the arrow to turn
power off. (to conserve battery power, be sure to turn the AH1 off when not in use). Be sure to mute the audio signal at your external
mixer or amplifier before turning the AH1 power on or off, or an audible pop may result.
12
Samson AirLine
Guided Tour - AH1 Headset Transmitter
ENGLISH
To Next Page
Loading...
