Samson Carbon 49 - Rear Panel Controls; Rear Panel Control Descriptions

10
4
5
6
7
8 9
10
321
1234
Rear Panel Controls and Functions
1. POWER Switch - Slide this switch to turn the keyboard on and o.
2. USB Connection - Connect a standard USB cable from this port to the USB con-
nection on a computer or iPad to provide power to the keyboard, as well as to
send and receive MIDI data.
3. MIDI OUT - Use a 5-pin MIDI cable to connect the Carbon 49 to an external MIDI
device.
4. SUSTAIN Pedal Input - Connect a ¼” sustain or expression pedal to this input. This
input is preset from the factory to send MIDI sustain (CC #64) messages. The SUS-
TAIN pedal input can be assigned to send dierent MIDI parameters in Edit Mode
(see p.14 for more information).