EasyManuals Logo

Samson TXM20 User Manual

Samson TXM20
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
25
Specifications
SPECIFICATIONS
Rated Output power 2 X 500W at 4Ω @0.1% THD at 1KHz
1 X 1000W at 8Ω Bridged
Frequency response 20Hz~20KHz+/-0.7dB@1W Output into 8Ω (AMP OUT)
20 Hz~20KHz+/-0.4@+4dB Output into 10kΩ (MAIN OUT,
AUX OUT, AUX SEND, EFX OUT)
Total Harmonic Distortion Less than 0.06%@20Hz~20KHz, 75W output into4Ω (AMP OUT)
Less than 0.1%@20 Hz~20KHz+14dB output into 10KΩ
(MAIN OUT, AUX OUT, AUX SEND, EFX OUT)
(Average,RS+150Ω) HUM & Noise -124dB equivalent input noise
(with 22Hz~22KHz BPF) -100dB residual output noise (MAIN OUT, MONITOR OUT, EFX OUT)
-70dB (MAIN OUT, AUX OUT) Master level control at maximum, all
channel level control at minimum.
-70dB (EFX OUT) Master level control at maximum, all channel level
controls at minimum
Maximum Voltage Gain 99dB CH IN (MIC) to AMP OUT
74dB CH IN (MIC) to MAIN OUT, MONITOR OUT
70dB CH IN (MIC) to AUX 2 OUT
52.2dB CH IN (MIC) to REC OUT
54dB CH IN (LINE) to MAIN OUT, MONITOR OUT
16dB AUX IN to MAIN OUT
24dB TAPE IN to MAIN OUT
Crosstalk 1KHz 70dB adjacent input, 70dB input to output
Input Channel Equalization
Mono Channel HIGH 12KHz shelving (+/- 15dB Maximum)
MID variable 100 Hz to 8kHz peaking (+/- 15dB Maximum)
LOW 80Hz shelving (+/- 15dB Maximum)
Stereo Channel HIGH 12KHz shelving (+/- 15dB Maximum)
MID 2.5KHz peaking (+/- 15dB Maximum)
LOW 80Hz shelving (+/- 15dB Maximum)
Meters 11 POINT LED METERS (-20, -15, -10, -7, -5,-3, 0, +1, +2, +4, +6dB)
Graphic Equalizer 9 bands (63, 125, 250, 500, 1K, 2K, 4K, 8K, 16KHz)
Internal DSP Effects 24 BIT - 10 Presets each: 00-09 Performance; 10-19 Hall Reverb,
20-29 Plate Reverb; 30-39 Spring Reverb; 40-49 Echo; 50-59
Flange + Verb; 60-69 Chorus + Verb; 70-79 Echo + Verb; 80-89
Chorus; 90-99 Flange
Phantom Power +48V
CLIP Indicators Turn on: THD> 0.1%
Foot Switch DIGITAL EFFECT MUTE: ON/OFF
GENERAL
Power Requirement 120V/60 Hz, 240V/50Hz (Country Specific)
Power Consumption
TXM16 1900W, MAX.
TXM20 2100W,MAX.
Weight
TXM16 42 lbs./19.5Kg
TXM20 50.6 lbs./23.5Kg
Dimensions
TXM16 19 1/4” (W)x 6 1/4” (H) x 20 3/4” (D)
489mm (W)x 159mm(H) x 527mm (D)
TXM20 21 1/2” (W)x 6 1/4” (H) x 21” (D)
622mm (W)x 159mm(H) x 533mm (D)
Specifications are subject to change without notice.

Other manuals for Samson TXM20

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Samson TXM20 and is the answer not in the manual?

Samson TXM20 Specifications

General IconGeneral
TypeAnalog
Channels20
EQ Bands3-band
EQYes
Aux Sends4
Phantom PowerYes
Outputs - Main2 x XLR, 2 x 1/4"
Line Inputs20
Outputs - Aux4 x 1/4" TRS
Faders60mm Faders
Power SupplyInternal

Related product manuals