Samsung 50 Series

$=4B'0 "
-4-
This feature allows you to see optimal screen quality according to your viewing position
• <Off> :Select when viewing from the front position. 5
• <Lean Back Mode 1> :Select when viewing from a slightly lower position6
• <Lean Back Mode 2> :Select when viewing from the lower position7
• <Standing Mode> :Select when viewing from the upper position8
• <Side Mode> :Select when viewing from the left or right position9
• <Custom> : When this function is selected ,setting for <Lean Back Mode 1> is applied by default .Users can
set suitable picture quality as needed
• <Group View Mode> :Select when two or more person view among , , position at the same time.5 8 9
This menu is unavailable when <MagicBright> is set to <Dynamic Contrast> or <Cinema> mode.
This menu is unavailable when <MagicColor> or <Color Effect>is set.
1'
Removes vertical noise lines (line pattern) from the screen.
The location of the screen may be changed after the adjustment. In this case, move the screen so that the
screen is displayed at the center of the display panel using the <H-Position> menu.
This function is only available in analog mode.
9
Removes horizontal noise lines (line pattern) from the screen.
If you cannot remove the noise completely with the <Fine> function, adjust the <Coarse> and then use the
<Fine> function again.
This function is only available in analog mode.
,@;
#C
When watching with a DVD or set-top box connecting to the product via HDMI, image quality deterioration
(black level, lower-quality contrast, lighter color tone, etc.) may occur depending on the connected
external device.
• <Normal>
• <Low>
This function is active only when the external device is connected via <HDMI>. The <HDMI
Black Level> function may not be compatible with all external devices.