$=4B'0
@E3F=@@=!"
0 !
,G'
Moves the position of the display area on the screen horizontally.
This function is only available in analog mode.
5G'
Moves the position of the display area on the screen vertically.
This function is only available in analog mode.
@0-%
PC signals
• <Auto> - The picture is displayed at the aspect ratio of the input signal.
• <Wide> - The picture is displayed in full screen regardless of the aspect ratio of the input signal.
• A signal not in the standard mode table is not supported.
• If the resolution is set to the optimal resolution, the aspect ratio does not change whether the <Image Size>
is set to <Auto> or <Wide>.
AV signals
• <4 : 3> - Displays pictures at the 4 : 3 aspect ratio.
• <16 : 9> - Displays pictures at the 16 : 9 aspect ratio.
• This can on
ly be set wh
en <PC/AV
Mode>
is set to <A
V>.
,G
'
You can adjust the horizontal position of the OSD.
5G
'
You can adjust the vertical position of the OSD.
To Next Page
Loading...
