Samsung AE040RXED Series User Manual

Samsung AE040RXED Series

136 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

ECO HEATING SYSTEM CONTENTS

ECO HEATING SYSTEM

OUTDOOR UNIT

TANK INTEGRATED

HYDRO UNIT

1. Precautions

2. General Overview

3. Disassembly and Reassembly

4. Troubleshooting

5. PCB Diagram

6. Wiring Diagram

7. Reference Sheet

Model :

(Split)

AE040RXEDEG

AE060RXEDEG

AE090RXEDEG

AE090RXEDGG

(Mono)

AE050RXYDEG

AE080RXYDEG

AE120RXYDEG

AE160RXYDEG

AE080RXYDGG

AE120RXYDGG

AE160RXYDGG

(Split)

AE200RNWSEG

AE260RNWSEG

AE260RNWSGG

(Mono)

AE200RNWMEG

AE260RNWMEG

AE260RNWMGG

AE090RNYDEG

AE090RNYDGG

HYDRO UNIT

Other manuals for Samsung AE040RXED Series

Installation Manual74 pages

Questions and Answers:

E
Emily WilsonAug 28, 2025
What to do if [Inverter] IPM over current error occurs in Samsung Heating System?
- A
  Anthony WilliamsAug 28, 2025
  If you are encountering an IPM over current error on your Samsung Heating System, verify the coolant charging status. Also, check the compressor connection and ensure it's operating normally. Inspect for any obstructions around the indoor and outdoor units. Confirm that the outdoor unit service valve is open and that the indoor/outdoor installation pipe and wiring are correctly installed.
J
Joseph FlowersAug 27, 2025
What to do if my Samsung AE040RXED shows a short- or open-circuit error for the Zone 2 indoor unit room temperature sensor?
- P
  Paige FitzgeraldAug 27, 2025
  If your Samsung Heat Pump displays a short- or open-circuit error of the room temperature sensor of the Zone 2 indoor unit (detected only when the room thermostat is used), the suggested solution is to change parts.
R
Renee ShafferAug 26, 2025
What to do if my Samsung Heat Pump shows a short- or open-circuit error for the Zone 1 indoor unit room temperature sensor?
- S
  Sarah MooreAug 26, 2025
  If your Samsung Heat Pump displays a short- or open-circuit error of the room temperature sensor of the Zone 1 indoor unit (detected only when the room thermostat is used), the suggested solution is to change parts.
M
Michael WilliamsAug 25, 2025
What does a low flow rate error mean on my Samsung AE040RXED, and how do I fix it?
- S
  Shirley WoodsAug 26, 2025
  If your Samsung Heat Pump displays a low flow rate error, it indicates that there is not enough water flow. The suggested action is to turn the water pump ON.
S
Sarah SimmonsAug 25, 2025
What to do if there is a tracking error between remote controller and the Hydro unit in my Samsung AE040RXED?
- C
  Cynthia MillerAug 25, 2025
  If your Samsung Heat Pump displays a tracking error between the remote controller and the Hydro unit, the suggested solution is to change parts.

Samsung AE040RXED Series Specifications

General

Series	AE040RXED
Category	Heat Pump
Cooling Capacity	4.0 kW
Energy Efficiency Class (Heating)	A++
Energy Efficiency Class (Cooling)	A++
Refrigerant	R32
Noise Level (Indoor Unit)	21 dB(A)
Power Supply	220-240V, 50Hz
Operating Temperature Range (Heating)	-15°C to 24°C
Operating Temperature Range (Cooling)	-10°C to 46°C

Related product manuals

Samsung AE090RXEDEG

Samsung AE090RXEDGG

Samsung AE080RXYDEG

Samsung AE050RXYDEG

Samsung AE090JXEDGH

Preview: Samsung AE090JXEDEH

Samsung AE090JXEDEH

Preview: Samsung AE050JXYDEH/EU

Samsung AE050JXYDEH/EU

Samsung AE090JXYDEH/EU

Samsung AE260RNWSGG

Samsung AE160JXEDGH

Samsung AE120JXYDEH/EU

Samsung AE160JXYDEH/EU